Canon EOS-6D Mark ii
Canon EOS-6D Mark ii – Remote Capture Software Settings
Camera Setup Instructions for Shutter Stream Remote Capture Software are as follows:
*Be sure to first Clear All Camera Settings in the Menu Options
1. Set the Mode Dial to Manual (M)
2. Set Image Quality to JPG (any image quality – preferably Large should maximum resolution images be preferred) or JPG+RAW should RAW image format be required (note Shutter Stream does not have the ability to Crop RAW images)
Additional Camera Information:
Live View Exposure Simulation: Yes
Live View Window Size: Max 960 x 640
Camera Settings Available: Aperture, Shutter Speed, White Balance, ISO, Manual Focal Point Adjustment
Product Info: User Guide and Additional Information can be found on the manufacturers website: see here
3. Set Auto Power Off to Off
4. Set Auto Rotate to Off
5. Set Lens to Auto Focus (AF switch on Lens). Alternatively should user prefer to physically adjust focal point manually, leave the lens in Manual Focus (MF)
6. Set AF Point Selection to Automatic Selection
7. Remove the cameras SD/CF memory card
8. Set the Live View shooting/Movie shooting button to Live View Shooting.
9. Set Live View Exposure Simulation to Enable
10. Set Aspect Ratio to 3:2
11. Disable any default or autorun or remote capture applications that might take control of your camera when plugged in through USB. These will often compete with the Shutter Stream program and take control of the camera –not allowing Shutter Stream to communicate with the camera (required).
Windows – Check AutoPlay Settings and set camera default to ‘Ask me Every Time‘ OR ‘Take no Action‘
Mac – Open iPhoto, go to its Preferences and select Connection camera opens: No application.
Open Image Capture, select your camera, then in pop up area in lower-left select Connection camera opens: No application
Other imaging applications can interfere with camera communication. Please also check these to ensure they are not taking control of your camera.
12. If you have Anti-Virus Software, be sure to white-list Shutter Stream so that it may access your camera