Canon EOS-5D Mark III

Canon EOS-5D Mark III – Remote Capture Software Settings

canon remote capture software settings - EOS 5D Mark III

Camera Setup Instructions for Shutter Stream Remote Capture Software are as follows:

Required *Be sure to first Clear All Camera Settings/Restore Defaults in the Menu Options

1. Set the Mode Dial to Manual (M)

camera-mode-manual-dial-1

 

 

 

2. Set Image Quality to JPG (any image quality – preferably Large should maximum resolution images be preferred) or JPG+RAW should RAW image format be required (note Shutter Stream does not have the ability to Crop RAW images)

Additional Camera Information:

Live View Exposure Simulation: Yes

Live View Window Size: Max 960 x 640

Camera Settings Available: Aperture, Shutter Speed, White Balance, ISO, Manual Focal Point Adjustment

Product Info: User Guide and Additional Information can be found on the manufacturers website: see here

Canon Remote Capture Software

3. Set Auto Power Off to Off (required)

4. Set Auto Rotate to Off (required)

5. Set Lens to Auto Focus (AF switch on Lens). Alternatively should user prefer to physically adjust focal point manually, leave the lens in Manual Focus (MF)

6. Set AF Point Selection to Automatic Selection (not required)

7. Remove the cameras SD/CF memory card

8. Set Silent LV Shootting to Disable if you use an external flash

9. Set Live View Shooting/Movie shooting button to Live View Shooting

10. Set Release shutter without card to On or Enable (required)

11. Set Live View shooting AF mode to Quick mode or Live mode (but not face detection mode).

12. Set Auto Lighting Optimizer to Off.

13. Set ISO speed setting increments (in Custom Function 2) to 1: 1-stop.

14. Set Exposure Simulation to Enable

15. Set Aspect Ration to 3:2

15. Disable any default or autorun or remote capture applications that might take control of your camera when plugged in through USB. These will often compete with the Shutter Stream program and take control of the camera –not allowing Shutter Stream to communicate with the camera (required).

Windows – Check AutoPlay Settings and set camera default to ‘Ask me Every Time‘ OR ‘Take no Action

Mac – Open iPhoto, go to its Preferences and select Connection camera opens: No application.

Other imaging applications can interfere with camera communication. Please also check these to ensure they are not taking control of your camera.

16. If you have Anti-Virus Software, be sure to white-list Shutter Stream so that it may access your camera