5. Set Lens to Auto Focus (AF switch on Lens). Alternatively should user prefer to physically adjust focal point manually, leave the lens in Manual Focus (MF). Disable Image Stabilization

6. Set AF Point Selection to Automatic Selection (not required)

7. Remove the cameras SD/CF memory card (suggested)

8. Set Silent LV Shooting to Disable if you use an external flash

9. Set Release shutter without card to On or Enable (required)

10. Set Live View shooting AF mode to Quick mode or Live mode (but not face detection mode).

11. Set Auto Lighting Optimizer to Off.

12. Set ISO speed setting increments (in Custom Function 2) to 1: 1-stop.

13. Set Exposure Simulation to Enable

14. Set Cropping/Aspect Ratio to Full (this is 3:2 ratio)

15. Turn Off cameras Wifi Connection

16. Set Add Cropping Information to Off

17. Disable any default or autorun or remote capture applications that might take control of your camera when plugged in through USB. These will often compete with the Shutter Stream program and take control of the camera –not allowing Shutter Stream to communicate with the camera (required).

Windows – Check AutoPlay Settings and set camera default to ‘Ask me Every Time‘ OR ‘Take no Action

Mac – Open iPhoto, go to its Preferences and select Connection camera opens: No application.

Other imaging applications can interfere with camera communication. Please also check these to ensure they are not taking control of your camera.

16. If you have Anti-Virus Software, be sure to white-list Shutter Stream so that it may access your camera