360 Product View Example: Picture Frame
360 Product View Example Specs
Total Process Time to Create Web-ready 360 Product View: ~7 minutes
Frame Count: 72 frames/360 rotation (1 capture every 5-degrees)
Zoom Level: 2X zoom
Software Used: Shutter Stream 360 Product Photography Software
Lighting Used: Iconasys Product Photography Lighting: Medium LumiPad 360 Lighting Kit (backlight at 90% power and front lights dimmed about 60%). 1X White Foamboard Panel on either side of the lighting kit + 1X White Foamboard Panel covering top of Lighting.
Turntable Used: Iconasys 360 Product Photography Turntable
Accessory Used: Medium 360 Photography Turntable Acrylic Riser
Camera/Lens Used: Canon Rebel T5/EOS 1200D/Kiss X70 with Canon 50mm f/1.8 STM Lens
360 Product View Example Notes
We used the Iconasys 4 Light LED Studio Kit to create a High Key Lighting Technique (to shoot 360 Toy Photography on white backgrounds). We positioned 2X lights at the background and set lights to full power. We then positioned 2X lights up front to light the subject – these were set at 50% dimming. By doing this, when we set the correct exposure for the product, the background is blown out to white.
We shot a total of 72 frames per 360 rotation (automated in a turn, stop, snap workflow) this process took ~2 minute. Next, we applied some batch image editing in the Shutter Stream 360 Software. These included:
Levels: Minimal adjustments to white reference point to achieve white on turntable platform surface
Sharpness: Increased Sharpness by 1.5 to enhance image quality
Please contact us if any questions or for additional info.
Learn more about Iconasys 360 Product Image Equipment & Software.