360 Jewelry View Example: Hanging Earring

360 Jewelry View Example: Specs

Total Process Time to Create 360 Jewelry View: ~6 minutes

Frame Count: 72 frames/360 rotation (1 capture every 5 degrees)

Zoom Level: 2X

Buttons Used: Grey Fill Player Option – Play, Left, Right & Zoom buttons in bottom center position.

Total File Size/Output Size: 15.3 MB (72 frames at 700 x 700 pixels with 1349 x 1349 pixel images for zoom. Images were pre-cropped at a perfect square using the Shutter Stream 360 Pre-Crop tool during image composition).

Lighting Used: Medium LumiPad 360 Product Photography Lighting System

Turntable/Software UsedSilver Series Jewelry Photography Turntable + Shutter Stream 360 Product Photography Software

Accessory UsedJewelry 360 Hanging Kit

Camera/Lens Used: Canon Rebel T6s/EOS 760D/EOS 8000D with Canon EF 50mm f/1.8 STM Lens

360 Jewelry View Example: Notes

We were able to shoot this instantly on a pure white background using the LumiPad 360 Product Photography Lighting System. In the Shutter Stream 360 Software we made 1 edit – increase Sharpness by 2.8 – then applied this editing change to the entire set of images.

Using the 360 Jewelry Photography Turntable and 360 Jewelry Hanging Kit, we used a rotation speed of 3 and set a pre-capture delay of 2 seconds (to eliminate the possibility of object movement between turntable start and stop).

For suspending the turntable, we used 2X 31″ tall Sawhorses, and a 2 x 4 foot sheet of wood which we drilled a 2″ hole in the center and painted white on the bottom. We then raised the LumiPad Lighting Panels using concrete blocks (8 x 8 x 8″ for the two front tower lights and 2X 8 x 8 x 8″ for the back light).

Last, we used two white foamboard sheets (included with LumiPad Lighting Kits) to help control side reflections.

360 Jewelry View: Hanging Earring Example

Please contact us if any questions or for additional info.

Learn more about Iconasys 360 Jewelry Photography Equipment & Software.

Scroll to Top