Home » 360 Degree Product Image Examples » 360 Product Spin Photography: Footwear Example
360 Product Spin Photography Example: Footwear
360 Product Spin Photography Specs
Total Process Time to Create 360 Product Spin Photography: ~6.5 minutes
Frame Count: 60 frames/360 rotation (1 capture every 6 degrees)
Zoom Level: 1.8X zoom
Lighting Used: Medium LumiPad 360 Product Photography Lighting System
Turntable/Software Used: Silver Series MID Photography Turntable + Shutter Stream 360 Product Photography Software
Accessory Used: Medium 360 Turntable Acrylic Riser
Camera/Lens Used: Canon Rebel T5 (aka: EOS 1200D, Kiss X70) with Canon EF 50mm f/1.8 STM Lens
360 Product Spin Photography Notes
We had dimmed the light on the LumiPad LED Panels (about 10% dim on back light and about 40% dim on front lights). In the Shutter Stream 360 Software we applied the following edits:
Levels – Moved right reference point to a value of 243
Sharpness – increased to 1.5
Add Frame – Added 100 pixels of white pixels to the bottom of the frame
These editing changes were made to all images in 1 click using ‘Apply to All’ editing feature.
Using the Silver Series MID 360 Product Spin Photography Turntable and Medium 360 Acrylic Riser we used a rotation speed of 1 (60 image capture took ~2.5 minutes).
Last, we used three cinder blocks (sourced from Home Depot) to raise the back light and two front tower light panels to compensate for the riser height. We also used a 3 white foamboard sheets (included) that was placed on top and either side of the lighting panels to contain the lighting.
Please contact us if any questions or for additional info.
Learn more about Iconasys 360 Footwear Photography Equipment & Software.