360 Product Image: Handbag Example

360 Product Image Specs

Total Process Time to Create Web-ready 360 Product Image: ~6.5 minutes

Frame Count: 60 frames/360 rotation (1 capture every 6 degrees)

Zoom Level: 1.8X zoom

Lighting Used: Medium LumiPad 360 Product Photography Lighting System

Turntable/Software UsedSilver Series MID Photography Turntable + Shutter Stream 360 Product Photography + Video Software

Accessory Used: Medium 360 Turntable Acrylic Riser

Camera/Lens Used: Canon Rebel T5 (aka: EOS 1200D, Kiss X70) with Canon EF 50mm f/1.8 STM Lens

360 Product Image Notes

We had dimmed the light on the LumiPad LED Panels (about 10% dim on backlight and about 40% dim on front lights). In the Shutter Stream 360 Software we applied the following edits:

Levels – Moved right reference point to a value of 243
Sharpness – increased to 1.5
Add Frame – Added 100 pixels of white pixels to the bottom of the frame

These editing changes were made to all images in 1 click using ‘Apply to All’ editing feature.

Using the Silver Series MID 360 Product Imaging Turntable and Medium 360 Acrylic Riser we used a rotation speed of 1 (48 image capture took ~2 minutes) .

We had shot this on a desktop set up.

Last, we used three cinder blocks (sourced from Home Depot) to raise the back light and two front tower light panels to compensate for the riser height. We also used a single white foamboard sheet (included with LumiPad 360 Product Photography Lighting Kits) that was set on top of the lighting panels to bounce light back on the top of the purse.

Please contact us for additional info or for a quote on this 360 Product Imaging Set up.

Please contact us if any questions or for additional info.

Learn more about Iconasys solutions for 360 Purse & Handbag Photography.

Scroll to Top