Partners  |  About Us  |  Blog  |  Resources  |  Training  |  Customer Reviews  |  Case Studies  |  Contact Us

360 Hanging Earring Image: Iconasys Example

360 Hanging Earring Image Specs

Total Process Time to Create Web-ready 360 Product Image: ~6.5 minutes

Frame Count: 72 frames/360 rotation (1 capture every 5 degrees)

Zoom Level: No zoom

Buttons Used: Black Fill Player Option – Play, Left, Right buttons in bottom left & Full Screen button in top right

Total File Size/Output Size: 9 MB (72 frames at 1199 x 1311 px). View high resolution 360 Spin Product Photo here

Lighting UsedMedium LumiPad 360 Product Photography Lighting System

Turntable/Software UsedSilver Series Jewelry Photography Turntable + Shutter Stream 360 Product Photography Software

Accessory UsedJewelry 360 Hanging Kit

Camera/Lens Used: Canon Rebel T6s/EOS 760D/EOS 8000D with Canon EF 50mm f/1.8 STM Lens

360 Hanging Earring Image Notes

We were able to shoot this 360 Hanging Earring Image instantly on a pure white background using the LumiPad 360 Product Photography Lighting System. In the Shutter Stream 360 Software we made 1 edit – increase Sharpness by 2.8 – then applied this editing change to the entire set of images.

Using the 360 Jewelry Photography Turntable and 360 Jewelry Hanging Kit, we used a rotation speed of 3 and set a pre-capture delay of 2 seconds (to eliminate the possibility of object movement between turntable start and stop).

For suspending the turntable, we used 2X 31″ tall Sawhorses, and a 2 x 4 foot sheet of wood which we drilled a 2″ hole in the center and painted white on the bottom. We then raised the LumiPad Lighting Panels using concrete blocks (8 x 8 x 8″ for the two front tower lights and 2X 8 x 8 x 8″ for the back light). Last, we used two white 20 x 30″ white foamboard sheets to help control side reflections.

Please contact us for additional info or for a quote on this 360 Hanging Jewelry Photography Set up.

360 hanging earring images
Scroll to Top