360 Shoe Photography: Gold Heel

 

 

360 Shoe Photography Specs

Total Process Time to Create Web-ready 360 Product View: ~6.5 minutes

Frame Count: 60 frames/360 rotation (1 capture every 6 degrees)

Zoom Level: 1.8X zoom

Lighting Used: Medium LumiPad 360 Product Photography Lighting System

Turntable/Software Used: Silver Series MID Photography Turntable + Shutter Stream 360 Product Photography Software

Accessory Used: Medium 360 Turntable Acrylic Riser

Camera/Lens Used: Canon Rebel T5 (aka: EOS 1200D, Kiss X70) with Canon EF 50mm f/1.8 STM Lens

360 Shoe Photography Notes

We had dimmed the light on the LumiPad LED Panels (about 10% dim on back light and about 40% dim on front lights). In the Shutter Stream 360 Software we applied the following edits:

Levels – Moved right reference point to a value of 243
Sharpness – increased to 1.5
Add Frame – Added 100 pixels of white pixels to the bottom of the frame

These editing changes were made to all images in 1 click using ‘Apply to All’ editing feature.

Using the Silver Series MID 360 Product Photography Turntable and Medium 360 Acrylic Riser we used a rotation speed of 1 (60 image capture took ~2.5 minutes) .

We had shot this on a desktop set up.

Last, we used three cinder blocks (sourced from Home Depot) to raise the back light and two front tower light panels to compensate for the riser height. We also used a 3 white 20 x 30″ white foamboard sheet that was placed on top and either side of the lighting panels to contain the lighting.

Please contact us for additional info or for a quote on this 360 Shoe Photography Set up.

360 shoe photography