360 Product Image: Sunski Sunglasses
360 Product Image Shooting Specs
Total Process Time to Create Web-ready 360 Product View: ~6 minutes
Frame Count: 48 frames/360 rotation (1 capture every 7.5 degrees)
Zoom Level: 1.8X zoom
Total File Size/Output Size: 4.9MB (48 frames at 1500 x 742 px). Images were shot at 2926 x 1655 pixels wide (pre-cropped using Live View Crop tool to define a shooting area), we then resized the 360 product image set during output to 1500 pixels wide. We composed the 360 View at 800 pixels while including 1500 pixel wide image set for zoom. View 360 product view *iframe output here (*iframe dynamically fit/scale to viewing window).
Lighting Used: Medium LumiPad 360 Product Photography Lighting System
Accessory Used: Medium 360 Turntable Acrylic Riser
360 Product View Notes
We had dimmed the light on the LumiPad LED Panels (about 10% dim on backlight and about 65% dim on front lights). The dimming on the front lights was in order to minimize reflections on the lenses and dimming on backlight was to minimize light passing through lenses. In the Shutter Stream 360 Product Photography Software we applied the following edits:
Lasso – Cut bottom part of frame and replaced with White
Levels – Moved right reference point to a value of 247
Sharpness – increased to 1.8
All editing changes were made in a batch process to the entire 360 image set using ‘Apply to All’ editing feature.
Using the Silver Series MID 360 Product Photography Turntable and Medium 360 Acrylic Riser we used a rotation speed of 1 (48 image capture took ~2 minutes) .
We had shot this on a desktop set up.
Last, we used three white 20 x 30″ white foamboard sheets one on each side of the turntable and one on top of the lighting to eliminate light leakage.