360 Jewelry Photography: Vertically Positioned Ring

360 Jewelry Photography: Vertically Positioned Ring

360 Jewelry Photography Specs

Total Process Time to Create Web-ready 360 Product View: ~5 1/2 minutes

Frame Count: 72 frames/360 rotation (1 capture every 5-degrees)

Zoom Level: 2X zoom (could have done up to 4X zoom as original images were shot at 2000+ pixels)

Lighting Used: LumiPad 360 Light Kit

Turntable Used: Silver Series Jewelry Photography Turntable

Software Used: Shutter Stream 360 Product Photography Software

Accessory Used: 9″ White Acrylic Top (included with Jewelry Riser + Platform Extender Kit)

Camera/Lens Used: Canon Rebel T6s/EOS 760D/EOS 8000D with Canon 100mm f/2.8 USM Lens

360 Product View Notes

We decided to communicate different shooting orientations for 360 Jewelry Photography and used the 9″ Acrylic Platform and fishing line to position this ring in a fixed, upright position.

First, to position the ring, we ran a fishing line through the center hole in the 9″ Acrylic Shooting Platform, hooked this around the ring, then ran the line back out the hole. We pulled the fishing line tight and used tape to secure the line in place. This resulted in being able to stand the ring securely in an upright position. We then placed this top over the 4″ master platform on the jewelry turntable and positioned in the center of the table.

For the lighting, we used our LED Studio Lights with one positioned facing top down, and the other two up front on the left and right of the ring. We also used white foamboard panels on the left and right of the ring to bounce light on the subject and control reflections.

360 jewelry photography turntable with Larger Platform


We shot 90-frames for this 360 ring example, this process was automated in a turn, stop, snap workflow through the Shutter Stream 360 Product Photography Software. This was shot with the Canon Rebel T6s camera and 100mm (f/2.8) Macro Lens was positioned about 13″ back (from the tip of the lens to the front of the ring). We had shot using an aperture of 10 (which we felt provided enough depth) and used a shutter speed at 1/25 (ISO set to 100). An option for those who require macro photography fully in focus from front to back, consider using the Product Photography Focus Stacking shooting mode.

Last, we used the Shutter Stream 360 Product Photography Software Editing tools to batch edit the set of images. Edits included:

White Point Color Picker: To adjust off white background to pure white
Sharpness: To enhance image quality
Levels: Adjusted Dark and Mid-tones to add contrast and make the silver pop

Please contact us for additional info or for a quote on this 360 Jewelry Photography solution.

Click to View Additional 360 Product View Examples